Results for var-ref.test.sh

statusbashmkshkshtoyshsushbrushosh
pass 26235172031
ok 2000000
N-I 1000000
BUG 2000000
FAIL 029282614110
total31313131313131
casebashmkshkshtoyshsushbrushoshdescription
0pass FAIL FAIL pass pass pass pass var ref ${!a}
detailsdetails
1pass FAIL FAIL pass pass pass pass ${!ref-default}
detailsdetails
2pass FAIL FAIL FAIL pass FAIL pass ${!undef:-}
detailsdetailsdetailsdetails
3BUG FAIL FAIL FAIL FAIL pass pass comparison to ${!array[@]} keys (similar SYNTAX)
detailsdetailsdetailsdetailsdetails
4pass FAIL pass FAIL pass pass pass ${!a[@]-'default'} is legal but fails with more than one element
detailsdetails
5pass FAIL FAIL FAIL pass pass pass var ref to $@ with @
detailsdetailsdetails
6pass FAIL FAIL FAIL pass pass pass var ref to $1 and $2 with 1 and 2
detailsdetailsdetails
7pass FAIL FAIL FAIL FAIL pass pass var ref: 1, @, *
detailsdetailsdetailsdetails
8pass FAIL FAIL pass pass pass pass var ref to special var BASH_SOURCE
detailsdetails
9pass FAIL FAIL FAIL pass pass pass var ref to $? with '?'
detailsdetailsdetails
10pass FAIL FAIL FAIL pass FAIL pass Var ref, then assignment with ${ := }
detailsdetailsdetailsdetails
11pass FAIL pass FAIL FAIL FAIL pass Var ref, then error with ${ ? }
detailsdetailsdetailsdetails
12pass FAIL FAIL FAIL FAIL FAIL pass Indirect expansion, THEN suffix operators
detailsdetailsdetailsdetailsdetails
13pass FAIL FAIL FAIL pass pass pass var ref OF array var -- silent a[0] decay
detailsdetailsdetails
14pass FAIL FAIL FAIL pass pass pass array ref
detailsdetailsdetails
15N-I pass pass FAIL FAIL FAIL pass array ref with strict_array
detailsdetailsdetailsdetails
16pass FAIL FAIL FAIL pass pass pass var ref TO array var
detailsdetailsdetails
17pass FAIL FAIL FAIL FAIL pass pass var ref TO array var, with subscripts
detailsdetailsdetailsdetails
18pass FAIL FAIL FAIL FAIL pass pass var ref TO assoc array a[key]
detailsdetailsdetailsdetails
19pass FAIL FAIL FAIL pass pass pass var ref TO array with arbitrary subscripts
detailsdetailsdetails
20pass FAIL FAIL FAIL pass pass pass Bizarre tilde expansion in array index
detailsdetailsdetails
21pass FAIL FAIL FAIL FAIL pass pass Indirect expansion TO fancy expansion features bash disallows
detailsdetailsdetailsdetails
22pass FAIL FAIL pass pass pass pass Bad var ref
detailsdetails
23pass FAIL FAIL pass pass pass pass Bad var ref 2
detailsdetails
24pass FAIL FAIL FAIL pass pass pass ${!OPTIND} (used by bash completion
detailsdetailsdetails
25ok pass FAIL FAIL FAIL FAIL pass var ref doesn't need cycle detection
detailsdetailsdetailsdetailsdetails
26BUG FAIL FAIL FAIL FAIL FAIL pass Var Ref Code Injection $(tee PWNED)
detailsdetailsdetailsdetailsdetailsdetails
27pass FAIL FAIL FAIL FAIL FAIL pass ${!array_ref:-set} and ${!array_ref:=assign}
detailsdetailsdetailsdetailsdetails
28pass FAIL FAIL FAIL FAIL FAIL pass Array indirect expansion with suffix operators
detailsdetailsdetailsdetailsdetails
29pass FAIL FAIL FAIL FAIL FAIL pass Array indirect expansion with replacements
detailsdetailsdetailsdetailsdetails
30ok FAIL FAIL FAIL FAIL FAIL pass Array indirect expansion with @? conversion
detailsdetailsdetailsdetailsdetailsdetails
104 passed, 2 OK, 1 not implemented, 2 BUG, 108 failed, 0 timeouts, 0 cases skipped

Details on runs that didn't PASS

mksh0 var ref ${!a}

[mksh stdout] Expected 'ref c b\n', got 'ref a b\n'

stdout: 
ref a b
stderr: 
ksh0 var ref ${!a}


[ksh stdout] Expected 'ref c b\n', got 'ref a b\n'



stdout: 


ref a b

stderr: 


mksh1 ${!ref-default}


[mksh stdout] Expected 'x=default\nx=\nx=foo\n', got 'x=ref\nx=ref\nx=ref\n'



stdout: 


x=ref
x=ref
x=ref

stderr: 


ksh1 ${!ref-default}


[ksh stdout] Expected 'x=default\nx=\nx=foo\n', got ''

[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[2]: ${!ref-default}: bad substitution

mksh2 ${!undef:-}


[mksh stdout] Expected 'NOUNSET\n', got 'undef=undef\nundef=undef\nNOUNSET\nundef=undef\nundef=undef\n'

[mksh status] Expected 1, got 0



stdout: 


undef=undef
undef=undef
NOUNSET
undef=undef
undef=undef

stderr: 


ksh2 ${!undef:-}


[ksh stdout] Expected 'NOUNSET\n', got ''



stdout: 


stderr: 


E: ksh: <stdin>[1]: ${!undef-"default"}: bad substitution

toysh2 ${!undef:-}


[toysh stdout] Expected 'NOUNSET\n', got "undef='default'\nundef=\nNOUNSET\nundef='default'\nundef=\n"

[toysh status] Expected 1, got 0



stdout: 


undef='default'
undef=
NOUNSET
undef='default'
undef=

stderr: 


brush2 ${!undef:-}


[brush status] Expected 1, got 0



stdout: 


NOUNSET

stderr: 


ERROR error: failed to parse parameter ''
ERROR error: failed to parse parameter ''
ERROR error: failed to parse parameter ''
ERROR error: failed to parse parameter ''

bash3 comparison to ${!array[@]} keys (similar SYNTAX)


stdout: 


['0', '1']
a_keys=0
['']
a_nobrackets=0
---
['A', 'B']
A_keys=0
['']
A_nobrackets=0

stderr: 


mksh3 comparison to ${!array[@]} keys (similar SYNTAX)



[mksh stdout]
Expected "['0', '1']\na_keys=0\n['']\na_nobrackets=0\n---\n['A', 'B']\nA_keys=0\nA_nobrackets=1\n"
Got      ''


[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh3 comparison to ${!array[@]} keys (similar SYNTAX)



[ksh stdout]
Expected "['0', '1']\na_keys=0\n['']\na_nobrackets=0\n---\n['A', 'B']\nA_keys=0\nA_nobrackets=1\n"
Got      ''


[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh3 comparison to ${!array[@]} keys (similar SYNTAX)



[toysh stdout]
Expected "['0', '1']\na_keys=0\n['']\na_nobrackets=0\n---\n['A', 'B']\nA_keys=0\nA_nobrackets=1\n"
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

sush3 comparison to ${!array[@]} keys (similar SYNTAX)



[sush stdout]
Expected "['0', '1']\na_keys=0\n['']\na_nobrackets=0\n---\n['A', 'B']\nA_keys=0\nA_nobrackets=1\n"
Got      "['0', '1']\na_keys=0\n['']\na_nobrackets=0\n---\n['0']\nA_keys=0\n['']\nA_nobrackets=0\n"




stdout: 


['0', '1']
a_keys=0
['']
a_nobrackets=0
---
['0']
A_keys=0
['']
A_nobrackets=0

stderr: 


mksh4 ${!a[@]-'default'} is legal but fails with more than one element


[mksh stdout] Expected 'status=1\nstatus=1\n', got "['default']\nstatus=0\n['0', '1', '2']\nstatus=0\n"



stdout: 


['default']
status=0
['0', '1', '2']
status=0

stderr: 


toysh4 ${!a[@]-'default'} is legal but fails with more than one element


[toysh stdout] Expected 'status=1\nstatus=1\n', got "['']\nstatus=0\n"

[toysh status] Expected 0, got 2



stdout: 


['']
status=0

stderr: 


main: line 4: sh: syntax error: x

mksh5 var ref to $@ with @


[mksh stdout] Expected 'ref=one two\n', got 'ref=ref\n'



stdout: 


ref=ref

stderr: 


ksh5 var ref to $@ with @


[ksh stdout] Expected 'ref=one two\n', got 'ref=ref\n'



stdout: 


ref=ref

stderr: 


toysh5 var ref to $@ with @


[toysh stdout] Expected 'ref=one two\n', got ''

[toysh status] Expected 0, got 1



stdout: 


stderr: 


set: bad --
main: line 3: sh: @: bad substitution

mksh6 var ref to $1 and $2 with 1 and 2


[mksh stdout] Expected 'ref1=one\nref2=two\n', got 'ref1=ref1\nref2=ref2\n'



stdout: 


ref1=ref1
ref2=ref2

stderr: 


ksh6 var ref to $1 and $2 with 1 and 2


[ksh stdout] Expected 'ref1=one\nref2=two\n', got 'ref1=ref1\nref2=ref2\n'



stdout: 


ref1=ref1
ref2=ref2

stderr: 


toysh6 var ref to $1 and $2 with 1 and 2


[toysh stdout] Expected 'ref1=one\nref2=two\n', got 'ref1=\nref2=\n'



stdout: 


ref1=
ref2=

stderr: 


set: bad --

mksh7 var ref: 1, @, *


[mksh stdout] Expected "['x']\n['x', 'y']\n['x y']\n", got "['ref']\n['ref']\n['ref']\n"



stdout: 


['ref']
['ref']
['ref']

stderr: 


ksh7 var ref: 1, @, *


[ksh stdout] Expected "['x']\n['x', 'y']\n['x y']\n", got "['ref']\n['ref']\n['ref']\n"



stdout: 


['ref']
['ref']
['ref']

stderr: 


toysh7 var ref: 1, @, *


[toysh stdout] Expected "['x']\n['x', 'y']\n['x y']\n", got "['']\n"

[toysh status] Expected 0, got 1



stdout: 


['']

stderr: 


set: bad --
main: line 3: sh: @: bad substitution
main: line 4: sh: *: bad substitution

sush7 var ref: 1, @, *


[sush stdout] Expected "['x']\n['x', 'y']\n['x y']\n", got "['x']\n['x y']\n['']\n"



stdout: 


['x']
['x y']
['']

stderr: 


mksh8 var ref to special var BASH_SOURCE


[mksh stdout] Expected 'lineno=2\n', got 'lineno=ref\n'



stdout: 


lineno=ref

stderr: 


ksh8 var ref to special var BASH_SOURCE


[ksh stdout] Expected 'lineno=2\n', got 'lineno=ref\n'



stdout: 


lineno=ref

stderr: 


mksh9 var ref to $? with '?'


[mksh stdout] Expected 'myfunc\n0\n', got 'ref\nref\n'



stdout: 


ref
ref

stderr: 


ksh9 var ref to $? with '?'


[ksh stdout] Expected 'myfunc\n0\n', got 'ref\nref\n'



stdout: 


ref
ref

stderr: 


toysh9 var ref to $? with '?'


[toysh stdout] Expected 'myfunc\n0\n', got '\n0\n'



stdout: 


0

stderr: 


mksh10 Var ref, then assignment with ${ := }


[mksh stdout] Expected 'foo\nfoo\n', got ''

[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[3]: ${!z:=foo}: bad substitution

ksh10 Var ref, then assignment with ${ := }


[ksh stdout] Expected 'foo\nfoo\n', got ''

[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[3]: ${!z:=foo}: bad substitution

toysh10 Var ref, then assignment with ${ := }


[toysh stdout] Expected 'foo\nfoo\n', got 'foo\n'

[toysh status] Expected 0, got 1



stdout: 


foo

stderr: 


main: line 4: sh: bad ${!z:=bar} @ 5

brush10 Var ref, then assignment with ${ := }


[brush stdout] Expected 'foo\nfoo\n', got 'foo\nbar\n'



stdout: 


foo
bar

stderr: 


mksh11 Var ref, then error with ${ ? }


[mksh stdout] Expected '', got 'w\ndone\n'

[mksh status] Expected 1, got 0



stdout: 


w
done

stderr: 


toysh11 Var ref, then error with ${ ? }


[toysh stdout] Expected '', got 'done\n'

[toysh status] Expected 1, got 0



stdout: 


done

stderr: 


main: line 3: sh: ww: 'my message'

sush11 Var ref, then error with ${ ? }


[sush stdout] Expected '', got 'done\n'

[sush status] Expected 1, got 0



stdout: 


done

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 3: ww: my message

brush11 Var ref, then error with ${ ? }


[brush stdout] Expected '', got 'done\n'

[brush status] Expected 1, got 0



stdout: 


done

stderr: 


ERROR error: expansion error: my message

mksh12 Indirect expansion, THEN suffix operators


[mksh stdout] Expected 'ok\n', got '${!a[1]} -> expected xx, got a[1]\n${!b[1]} -> expected asdf, got b[1]\n${!y:-foo} -> expected foo, got y\n${!x:-foo} -> expected aaabcc, got x\n${!x:?oops} -> expected aaabcc, got x\n${!y:+foo} -> expected , got foo\n${!x:2} -> expected abcc, got \n${!x:2:2} -> expected ab, got \n${!x#*a} -> expected aabcc, got xx\n${!x%%c*} -> expected aaab, got xx\n${!x/a*b/d} -> expected dcc, got xx\n${!p@P} -> expected $ , got p\nok\n'



stdout: 


${!a[1]} -> expected xx, got a[1]
${!b[1]} -> expected asdf, got b[1]
${!y:-foo} -> expected foo, got y
${!x:-foo} -> expected aaabcc, got x
${!x:?oops} -> expected aaabcc, got x
${!y:+foo} -> expected , got foo
${!x:2} -> expected abcc, got 
${!x:2:2} -> expected ab, got 
${!x#*a} -> expected aabcc, got xx
${!x%%c*} -> expected aaab, got xx
${!x/a*b/d} -> expected dcc, got xx
${!p@P} -> expected $ , got p
ok

stderr: 


ksh12 Indirect expansion, THEN suffix operators


[ksh stdout] Expected 'ok\n', got 'bad success: ${!#x}\nbad success: ${!#a[@]}\n${!a[1]} -> expected xx, got a[1]\n${!b[1]} -> expected asdf, got b[1]\n${!y:-foo} -> expected foo, got \n${!x:-foo} -> expected aaabcc, got \n${!x:?oops} -> expected aaabcc, got \n${!x:+foo} -> expected foo, got \n${!x:2} -> expected abcc, got \n${!x:2:2} -> expected ab, got \n${!x#*a} -> expected aabcc, got \n${!x%%c*} -> expected aaab, got \n${!x/a*b/d} -> expected dcc, got \n${!p@P} -> expected $ , got \nok\n'



stdout: 


bad success: ${!#x}
bad success: ${!#a[@]}
${!a[1]} -> expected xx, got a[1]
${!b[1]} -> expected asdf, got b[1]
${!y:-foo} -> expected foo, got 
${!x:-foo} -> expected aaabcc, got 
${!x:?oops} -> expected aaabcc, got 
${!x:+foo} -> expected foo, got 
${!x:2} -> expected abcc, got 
${!x:2:2} -> expected ab, got 
${!x#*a} -> expected aabcc, got 
${!x%%c*} -> expected aaab, got 
${!x/a*b/d} -> expected dcc, got 
${!p@P} -> expected $ , got 
ok

stderr: 


E: ksh: ${!y:-foo}: bad substitution
E: ksh: ${!x:-foo}: bad substitution
E: ksh: ${!x:?oops}: bad substitution
E: ksh: ${!y:+foo}: bad substitution
E: ksh: ${!x:+foo}: bad substitution
E: ksh: ${!x: 2}: bad substitution
E: ksh: ${!x: 2:2}: bad substitution
E: ksh: ${!x#*a}: bad substitution
E: ksh: ${!x%%c*}: bad substitution
E: ksh: ${!x/a*b/d}: bad substitution
E: ksh: ${!p@P}: bad substitution

toysh12 Indirect expansion, THEN suffix operators


[toysh stdout] Expected 'ok\n', got 'bad success: ${!!xd}\nbad success: ${!!x*}\n'

[toysh status] Expected 0, got 2



stdout: 


bad success: ${!!xd}
bad success: ${!!x*}

stderr: 


main: line 22: sh: syntax error: asdf

sush12 Indirect expansion, THEN suffix operators


[sush stdout] Expected 'ok\n', got '${!x:2} -> expected abcc, got \n${!x:2:2} -> expected ab, got \n${!p@P} -> expected $ , got \nok\n'



stdout: 


${!x:2} -> expected abcc, got 
${!x:2:2} -> expected ab, got 
${!p@P} -> expected $ , got 
ok

stderr: 


brush12 Indirect expansion, THEN suffix operators


[brush stdout] Expected 'ok\n', got '${!p@P} -> expected $ , got ${!p@P}\nok\n'



stdout: 


${!p@P} -> expected $ , got ${!p@P}
ok

stderr: 


mksh13 var ref OF array var -- silent a[0] decay


[mksh stdout] Expected 'first=\nfirst=zzz\n', got ''

[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh13 var ref OF array var -- silent a[0] decay


[ksh stdout] Expected 'first=\nfirst=zzz\n', got ''

[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh13 var ref OF array var -- silent a[0] decay


[toysh stdout] Expected 'first=\nfirst=zzz\n', got ''

[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

mksh14 array ref


[mksh stdout] Expected 'ale\n', got ''

[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh14 array ref


[ksh stdout] Expected 'ale\n', got ''

[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh14 array ref


[toysh stdout] Expected 'ale\n', got ''

[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

bash15 array ref with strict_array


stdout: 


ale

stderr: 


bash: line 1: shopt: strict_array: invalid shell option name

toysh15 array ref with strict_array


[toysh status] Expected 1, got 2



stdout: 


stderr: 


sh: shopt: No such file or directory
main: line 3: sh: syntax error: )

sush15 array ref with strict_array


[sush stdout] Expected u'', got 'ale\n'

[sush status] Expected 1, got 0



stdout: 


ale

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 1: shopt: strict_array: not supported yet

brush15 array ref with strict_array


[brush stdout] Expected u'', got 'ale\n'

[brush status] Expected 1, got 0



stdout: 


ale

stderr: 


shopt: strict_array: invalid shell option name

mksh16 var ref TO array var


[mksh stdout] Expected 'ale\nale bean\n', got ''

[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: shopt: not found
mksh: <stdin>[3]: syntax error: '(' unexpected

ksh16 var ref TO array var


[ksh stdout] Expected 'ale\nale bean\n', got ''

[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: shopt: inaccessible or not found
E: ksh: <stdin>[3]: syntax error: unexpected '('

toysh16 var ref TO array var


[toysh stdout] Expected 'ale\nale bean\n', got ''

[toysh status] Expected 0, got 2



stdout: 


stderr: 


sh: shopt: No such file or directory
main: line 3: sh: syntax error: )

mksh17 var ref TO array var, with subscripts



[mksh stdout]
Expected "['']\n['x']\n['z']\n['x', 'y', 'z']\n['x y z']\n"
Got      "['1']\n['1']\n['1']\n['1']\n['1']\n"




stdout: 


['1']
['1']
['1']
['1']
['1']

stderr: 


ksh17 var ref TO array var, with subscripts



[ksh stdout]
Expected "['']\n['x']\n['z']\n['x', 'y', 'z']\n['x y z']\n"
Got      "['1']\n['1']\n['1']\n['1']\n['1']\n"




stdout: 


['1']
['1']
['1']
['1']
['1']

stderr: 


toysh17 var ref TO array var, with subscripts



[toysh stdout]
Expected "['']\n['x']\n['z']\n['x', 'y', 'z']\n['x y z']\n"
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 4: sh: nonexistent[0]: bad substitution
main: line 5: sh: syntax error: x

sush17 var ref TO array var, with subscripts



[sush stdout]
Expected "['']\n['x']\n['z']\n['x', 'y', 'z']\n['x y z']\n"
Got      "['']\n['x']\n['z']\n['x y z']\n['x y z']\n"




stdout: 


['']
['x']
['z']
['x y z']
['x y z']

stderr: 


mksh18 var ref TO assoc array a[key]



[mksh stdout]
Expected 'ref=\nref_SUB=bean\nref_SUB_QUOTED=bean\nref_SUB_BAD=\n'
Got      ''


[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: shopt: not found
mksh: <stdin>[3]: syntax error: '(' unexpected

ksh18 var ref TO assoc array a[key]



[ksh stdout]
Expected 'ref=\nref_SUB=bean\nref_SUB_QUOTED=bean\nref_SUB_BAD=\n'
Got      ''


[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: shopt: inaccessible or not found
E: ksh: <stdin>[3]: syntax error: unexpected '('

toysh18 var ref TO assoc array a[key]



[toysh stdout]
Expected 'ref=\nref_SUB=bean\nref_SUB_QUOTED=bean\nref_SUB_BAD=\n'
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


sh: shopt: No such file or directory
main: line 3: sh: syntax error: )

sush18 var ref TO assoc array a[key]



[sush stdout]
Expected 'ref=\nref_SUB=bean\nref_SUB_QUOTED=bean\nref_SUB_BAD=\n'
Got      'ref=dip\nref_SUB=dip\nref_SUB_QUOTED=dip\nref_SUB_BAD=dip\n'




stdout: 


ref=dip
ref_SUB=dip
ref_SUB_QUOTED=dip
ref_SUB_BAD=dip

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 1: shopt: compat_array: not supported yet

mksh19 var ref TO array with arbitrary subscripts



[mksh stdout]
Expected 'works: a[1]\nworks: a[$b]\nworks: a[${c:-1}]\nworks: a[$(echo 1)]\nworks: a[$(( 3 - 2 ))]\n'
Got      ''




stdout: 


stderr: 


mksh: <stdin>[1]: shopt: not found

ksh19 var ref TO array with arbitrary subscripts



[ksh stdout]
Expected 'works: a[1]\nworks: a[$b]\nworks: a[${c:-1}]\nworks: a[$(echo 1)]\nworks: a[$(( 3 - 2 ))]\n'
Got      ''




stdout: 


stderr: 


E: ksh: <stdin>[1]: shopt: inaccessible or not found

toysh19 var ref TO array with arbitrary subscripts



[toysh stdout]
Expected 'works: a[1]\nworks: a[$b]\nworks: a[${c:-1}]\nworks: a[$(echo 1)]\nworks: a[$(( 3 - 2 ))]\n'
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


sh: shopt: No such file or directory
main: line 9: sh: syntax error: x

mksh20 Bizarre tilde expansion in array index


[mksh status] Expected 1, got 0



stdout: 


ref

stderr: 


ksh20 Bizarre tilde expansion in array index


[ksh status] Expected 1, got 0



stdout: 


ref

stderr: 


toysh20 Bizarre tilde expansion in array index


[toysh status] Expected 1, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: x

mksh21 Indirect expansion TO fancy expansion features bash disallows


[mksh stdout] Expected 'done\n', got '!x x\n!a[0] a[0]\n!a@ a\ndone\n'



stdout: 


!x x
!a[0] a[0]
!a@ a
done

stderr: 


mksh: <stdin>[9]: declare: not found
mksh: missing ]
mksh: missing ]

ksh21 Indirect expansion TO fancy expansion features bash disallows


[ksh stdout] Expected 'done\n', got '!x x\n!a[0] a[0]\n!a@ \ndone\n'



stdout: 


!x x
!a[0] a[0]
!a@ 
done

stderr: 


E: ksh: <stdin>[9]: declare: inaccessible or not found
E: ksh: missing ]
E: ksh: missing ]
E: ksh: ${!a@}: bad substitution

toysh21 Indirect expansion TO fancy expansion features bash disallows


[toysh stdout] Expected 'done\n', got ''

[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 8: sh: syntax error: x

sush21 Indirect expansion TO fancy expansion features bash disallows


[sush stdout] Expected 'done\n', got 'a[0 x\naa[k s\ndone\n'



stdout: 


a[0 x
aa[k s
done

stderr: 


mksh22 Bad var ref


[mksh stdout] Expected 'status=1\n', got 'ref a\nstatus=0\n'



stdout: 


ref a
status=0

stderr: 


ksh22 Bad var ref


[ksh stdout] Expected 'status=1\n', got 'ref a\nstatus=0\n'



stdout: 


ref a
status=0

stderr: 


mksh23 Bad var ref 2


[mksh stdout] Expected 'status=1\n', got 'ref b\nstatus=0\n'



stdout: 


ref b
status=0

stderr: 


ksh23 Bad var ref 2


[ksh stdout] Expected 'status=1\n', got 'ref b\nstatus=0\n'



stdout: 


ref b
status=0

stderr: 


mksh24 ${!OPTIND} (used by bash completion


[mksh stdout] Expected 'a\nx\ny\n', got 'OPTIND\nOPTIND\nOPTIND\n'



stdout: 


OPTIND
OPTIND
OPTIND

stderr: 


ksh24 ${!OPTIND} (used by bash completion


[ksh stdout] Expected 'a\nx\ny\n', got 'OPTIND\nOPTIND\nOPTIND\n'



stdout: 


OPTIND
OPTIND
OPTIND

stderr: 


toysh24 ${!OPTIND} (used by bash completion


[toysh stdout] Expected 'a\nx\ny\n', got '\nx\nx\n'



stdout: 


x
x

stderr: 


set: bad --

bash25 var ref doesn't need cycle detection


stdout: 


cycle=x
cycle=

stderr: 


bash: line 7: warning: a: circular name reference

ksh25 var ref doesn't need cycle detection


[ksh stdout] Expected 'cycle=x\n', got 'cycle=x\ncycle=\n'

[ksh status] Expected 1, got 0



stdout: 


cycle=x
cycle=

stderr: 


E: ksh: <stdin>[6]: typeset: b: expression recurses on parameter

toysh25 var ref doesn't need cycle detection


[toysh stdout] Expected 'cycle=x\n', got 'cycle=x\ncycle=\n'

[toysh status] Expected 1, got 0



stdout: 


cycle=x
cycle=

stderr: 


sh: typeset: No such file or directory
sh: typeset: No such file or directory

sush25 var ref doesn't need cycle detection


[sush stdout] Expected 'cycle=x\n', got 'cycle=x\ncycle=b\n'

[sush status] Expected 1, got 0



stdout: 


cycle=x
cycle=b

stderr: 


brush25 var ref doesn't need cycle detection


[brush stdout] Expected 'cycle=x\n', got 'cycle=x\ncycle=b\n'

[brush status] Expected 1, got 0



stdout: 


cycle=x
cycle=b

stderr: 


bash26 Var Ref Code Injection $(tee PWNED)


stdout: 


42
PWNED
0

stderr: 


mksh26 Var Ref Code Injection $(tee PWNED)


[mksh stdout] Expected '', got 'x\nNOPE\n'

[mksh status] Expected 1, got 0



stdout: 


x
NOPE

stderr: 


ksh26 Var Ref Code Injection $(tee PWNED)


[ksh stdout] Expected '', got 'x\nNOPE\n'

[ksh status] Expected 1, got 0



stdout: 


x
NOPE

stderr: 


toysh26 Var Ref Code Injection $(tee PWNED)


[toysh status] Expected 1, got 2



stdout: 


stderr: 


sh: typeset: No such file or directory
main: line 2: sh: syntax error: 42

sush26 Var Ref Code Injection $(tee PWNED)


[sush stdout] Expected '', got '42\nPWNED\n0\n'

[sush status] Expected 1, got 0



stdout: 


42
PWNED
0

stderr: 


brush26 Var Ref Code Injection $(tee PWNED)


[brush stdout] Expected '', got '42\nPWNED\n0\n'

[brush status] Expected 1, got 0



stdout: 


42
PWNED
0

stderr: 


mksh27 ${!array_ref:-set} and ${!array_ref:=assign}



[mksh stdout]
Expected "==== check ====\n['', '', '']\n['', '', '']\n==== assign ====\n['', '', '']\n['', '', '']\n['', '', '']\n['', '', '']\n"
Got      "==== check ====\n['ref']\n['', '', '']\n==== assign ====\n"


[mksh status] Expected 0, got 1



stdout: 


==== check ====
['ref']
['', '', '']
==== assign ====

stderr: 


mksh: <stdin>[11]: ${!ref:=assign}: bad substitution

ksh27 ${!array_ref:-set} and ${!array_ref:=assign}



[ksh stdout]
Expected "==== check ====\n['', '', '']\n['', '', '']\n==== assign ====\n['', '', '']\n['', '', '']\n['', '', '']\n['', '', '']\n"
Got      '==== check ====\n'


[ksh status] Expected 0, got 1



stdout: 


==== check ====

stderr: 


E: ksh: <stdin>[6]: ${!ref:-set}: bad substitution

toysh27 ${!array_ref:-set} and ${!array_ref:=assign}



[toysh stdout]
Expected "==== check ====\n['', '', '']\n['', '', '']\n==== assign ====\n['', '', '']\n['', '', '']\n['', '', '']\n['', '', '']\n"
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 2: sh: syntax error: ''

sush27 ${!array_ref:-set} and ${!array_ref:=assign}



[sush stdout]
Expected "==== check ====\n['', '', '']\n['', '', '']\n==== assign ====\n['', '', '']\n['', '', '']\n['', '', '']\n['', '', '']\n"
Got      "==== check ====\n['  ']\n['', '', '']\n==== assign ====\n['  ']\n['  ']\n['', '', '']\n['', '', '']\n"




stdout: 


==== check ====
['  ']
['', '', '']
==== assign ====
['  ']
['  ']
['', '', '']
['', '', '']

stderr: 


brush27 ${!array_ref:-set} and ${!array_ref:=assign}



[brush stdout]
Expected "==== check ====\n['', '', '']\n['', '', '']\n==== assign ====\n['', '', '']\n['', '', '']\n['', '', '']\n['', '', '']\n"
Got      "==== check ====\n['set']\n['set']\n==== assign ====\n['assign']\n['']\n['', '', '']\n"




stdout: 


==== check ====
['set']
['set']
==== assign ====
['assign']
['']
['', '', '']

stderr: 


ERROR error: cannot assign in this way

mksh28 Array indirect expansion with suffix operators



[mksh stdout]
Expected "==== v1 ====\n['lue']\n['al']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['']\n['']\n['empty']\n['']\n['assign']\nv2=assign\n==== a1 ====\n['']\n['']\n['empty']\n['']\n['assign']\n['assign']\n==== a2[0] ====\n['ement']\n['le']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['3']\n['2', '3']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh28 Array indirect expansion with suffix operators



[ksh stdout]
Expected "==== v1 ====\n['lue']\n['al']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['']\n['']\n['empty']\n['']\n['assign']\nv2=assign\n==== a1 ====\n['']\n['']\n['empty']\n['']\n['assign']\n['assign']\n==== a2[0] ====\n['ement']\n['le']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['3']\n['2', '3']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh28 Array indirect expansion with suffix operators



[toysh stdout]
Expected "==== v1 ====\n['lue']\n['al']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['']\n['']\n['empty']\n['']\n['assign']\nv2=assign\n==== a1 ====\n['']\n['']\n['empty']\n['']\n['assign']\n['assign']\n==== a2[0] ====\n['ement']\n['le']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['3']\n['2', '3']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

sush28 Array indirect expansion with suffix operators



[sush stdout]
Expected "==== v1 ====\n['lue']\n['al']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['']\n['']\n['empty']\n['']\n['assign']\nv2=assign\n==== a1 ====\n['']\n['']\n['empty']\n['']\n['assign']\n['assign']\n==== a2[0] ====\n['ement']\n['le']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['3']\n['2', '3']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      "====  ====\nv1=value\nv2=\n[]\n['element']\n['1', '2', '3']\n"




stdout: 


====  ====
v1=value
v2=
[]
['element']
['1', '2', '3']

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 1: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 2: function: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 4: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 5: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 6: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 7: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 8: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 9: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 11: Unexpected token: }

/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 13: test-suffixes: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 17: test-suffixes: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 21: test-suffixes: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 25: test-suffixes: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 29: test-suffixes: command not found

brush28 Array indirect expansion with suffix operators



[brush stdout]
Expected "==== v1 ====\n['lue']\n['al']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['']\n['']\n['empty']\n['']\n['assign']\nv2=assign\n==== a1 ====\n['']\n['']\n['empty']\n['']\n['assign']\n['assign']\n==== a2[0] ====\n['ement']\n['le']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['3']\n['2', '3']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      "==== v1 ====\n['${!ref[@]:2}']\n['${!ref[@]:1:2}']\n['value']\n['set']\n['value']\nv1=value\n==== v2 ====\n['${!ref[@]:2}']\n['${!ref[@]:1:2}']\n['empty']\n['']\nv2=\n==== a1 ====\n['${!ref[@]:2}']\n['${!ref[@]:1:2}']\n['empty']\n['']\n[]\n==== a2[0] ====\n['${!ref[@]:2}']\n['${!ref[@]:1:2}']\n['element']\n['set']\n['element']\n['element']\n==== a3[@] ====\n['${!ref[@]:2}']\n['${!ref[@]:1:2}']\n['1', '2', '3']\n['set']\n['1', '2', '3']\n['1', '2', '3']\n"




stdout: 


==== v1 ====
['${!ref[@]:2}']
['${!ref[@]:1:2}']
['value']
['set']
['value']
v1=value
==== v2 ====
['${!ref[@]:2}']
['${!ref[@]:1:2}']
['empty']
['']
v2=
==== a1 ====
['${!ref[@]:2}']
['${!ref[@]:1:2}']
['empty']
['']
[]
==== a2[0] ====
['${!ref[@]:2}']
['${!ref[@]:1:2}']
['element']
['set']
['element']
['element']
==== a3[@] ====
['${!ref[@]:2}']
['${!ref[@]:1:2}']
['1', '2', '3']
['set']
['1', '2', '3']
['1', '2', '3']

stderr: 


ERROR error: cannot assign in this way
ERROR error: cannot assign in this way

mksh29 Array indirect expansion with replacements



[mksh stdout]
Expected "==== v1 ====\n['alue']\n['valu']\n['vlu']\n['vxlux']\n==== v2 ====\n['']\n['']\n['']\n['']\n==== a1 ====\n['']\n['']\n['']\n['']\n==== a2[0] ====\n['lement']\n['elemen']\n['lmnt']\n['xlxmxnt']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh29 Array indirect expansion with replacements



[ksh stdout]
Expected "==== v1 ====\n['alue']\n['valu']\n['vlu']\n['vxlux']\n==== v2 ====\n['']\n['']\n['']\n['']\n==== a1 ====\n['']\n['']\n['']\n['']\n==== a2[0] ====\n['lement']\n['elemen']\n['lmnt']\n['xlxmxnt']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh29 Array indirect expansion with replacements



[toysh stdout]
Expected "==== v1 ====\n['alue']\n['valu']\n['vlu']\n['vxlux']\n==== v2 ====\n['']\n['']\n['']\n['']\n==== a1 ====\n['']\n['']\n['']\n['']\n==== a2[0] ====\n['lement']\n['elemen']\n['lmnt']\n['xlxmxnt']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

sush29 Array indirect expansion with replacements



[sush stdout]
Expected "==== v1 ====\n['alue']\n['valu']\n['vlu']\n['vxlux']\n==== v2 ====\n['']\n['']\n['']\n['']\n==== a1 ====\n['']\n['']\n['']\n['']\n==== a2[0] ====\n['lement']\n['elemen']\n['lmnt']\n['xlxmxnt']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      '====  ====\n'


[sush status] Expected 0, got 127



stdout: 


====  ====

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 1: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 2: function: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 4: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 5: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 6: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 7: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 8: `': invalid name
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 10: Unexpected token: }

/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 12: test-rep: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 15: test-rep: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 18: test-rep: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 21: test-rep: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 24: test-rep: command not found

brush29 Array indirect expansion with replacements



[brush stdout]
Expected "==== v1 ====\n['alue']\n['valu']\n['vlu']\n['vxlux']\n==== v2 ====\n['']\n['']\n['']\n['']\n==== a1 ====\n['']\n['']\n['']\n['']\n==== a2[0] ====\n['lement']\n['elemen']\n['lmnt']\n['xlxmxnt']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['1', '2', '3']\n['1', '2', '3']\n"
Got      "==== v1 ====\n['alue']\n['valu']\n['${!ref[@]//[a-f]}']\n['${!ref[@]//[a-f]/x}']\n==== v2 ====\n['']\n['']\n['${!ref[@]//[a-f]}']\n['${!ref[@]//[a-f]/x}']\n==== a1 ====\n['']\n['']\n['${!ref[@]//[a-f]}']\n['${!ref[@]//[a-f]/x}']\n==== a2[0] ====\n['lement']\n['elemen']\n['${!ref[@]//[a-f]}']\n['${!ref[@]//[a-f]/x}']\n==== a3[@] ====\n['', '', '']\n['', '', '']\n['${!ref[@]//[a-f]}']\n['${!ref[@]//[a-f]/x}']\n"




stdout: 


==== v1 ====
['alue']
['valu']
['${!ref[@]//[a-f]}']
['${!ref[@]//[a-f]/x}']
==== v2 ====
['']
['']
['${!ref[@]//[a-f]}']
['${!ref[@]//[a-f]/x}']
==== a1 ====
['']
['']
['${!ref[@]//[a-f]}']
['${!ref[@]//[a-f]/x}']
==== a2[0] ====
['lement']
['elemen']
['${!ref[@]//[a-f]}']
['${!ref[@]//[a-f]/x}']
==== a3[@] ====
['', '', '']
['', '', '']
['${!ref[@]//[a-f]}']
['${!ref[@]//[a-f]/x}']

stderr: 


bash30 Array indirect expansion with @? conversion


stdout: 


==== v1 ====
["'value'"]
['value']
['']
==== v2 ====
["''"]
['']
['']
==== a1 ====
['']
['']
['a']
==== a2[0] ====
["'element'"]
['element']
['a']
==== a3[@] ====
["'1'", "'2'", "'3'"]
['1', '2', '3']
['a', 'a', 'a']

stderr: 


mksh30 Array indirect expansion with @? conversion



[mksh stdout]
Expected '==== v1 ====\n[\'value\']\n[\'value\']\n[\'\']\n==== v2 ====\n["\'\'"]\n[\'\']\n[\'\']\n==== a1 ====\n[\'\']\n[\'\']\n[\'a\']\n==== a2[0] ====\n[\'element\']\n[\'element\']\n[\'a\']\n==== a3[@] ====\n[\'1\', \'2\', \'3\']\n[\'1\', \'2\', \'3\']\n[\'a\', \'a\', \'a\']\n'
Got      ''


[mksh status] Expected 0, got 1



stdout: 


stderr: 


mksh: <stdin>[1]: syntax error: '(' unexpected

ksh30 Array indirect expansion with @? conversion



[ksh stdout]
Expected '==== v1 ====\n[\'value\']\n[\'value\']\n[\'\']\n==== v2 ====\n["\'\'"]\n[\'\']\n[\'\']\n==== a1 ====\n[\'\']\n[\'\']\n[\'a\']\n==== a2[0] ====\n[\'element\']\n[\'element\']\n[\'a\']\n==== a3[@] ====\n[\'1\', \'2\', \'3\']\n[\'1\', \'2\', \'3\']\n[\'a\', \'a\', \'a\']\n'
Got      ''


[ksh status] Expected 0, got 1



stdout: 


stderr: 


E: ksh: <stdin>[1]: syntax error: unexpected '('

toysh30 Array indirect expansion with @? conversion



[toysh stdout]
Expected '==== v1 ====\n[\'value\']\n[\'value\']\n[\'\']\n==== v2 ====\n["\'\'"]\n[\'\']\n[\'\']\n==== a1 ====\n[\'\']\n[\'\']\n[\'a\']\n==== a2[0] ====\n[\'element\']\n[\'element\']\n[\'a\']\n==== a3[@] ====\n[\'1\', \'2\', \'3\']\n[\'1\', \'2\', \'3\']\n[\'a\', \'a\', \'a\']\n'
Got      ''


[toysh status] Expected 0, got 2



stdout: 


stderr: 


main: line 1: sh: syntax error: )

sush30 Array indirect expansion with @? conversion



[sush stdout]
Expected '==== v1 ====\n[\'value\']\n[\'value\']\n[\'\']\n==== v2 ====\n["\'\'"]\n[\'\']\n[\'\']\n==== a1 ====\n[\'\']\n[\'\']\n[\'a\']\n==== a2[0] ====\n[\'element\']\n[\'element\']\n[\'a\']\n==== a3[@] ====\n[\'1\', \'2\', \'3\']\n[\'1\', \'2\', \'3\']\n[\'a\', \'a\', \'a\']\n'
Got      '====  ====\n'


[sush status] Expected 0, got 127



stdout: 


====  ====

stderr: 


/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 1: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 2: function: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 4: 'dummy': syntax error: operand expected (error token is "'dummy'")
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 5: `${!ref[@]@Q}': bad substitution
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 6: `${!ref[@]@P}': bad substitution
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 7: `${!ref[@]@a}': bad substitution
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 9: Unexpected token: }

/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 11: test-op0: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 14: test-op0: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 17: test-op0: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 20: test-op0: command not found
/home/andy/git/oils-for-unix/oils/../../shells/rusty_bash/target/release/sush: line 23: test-op0: command not found

brush30 Array indirect expansion with @? conversion



[brush stdout]
Expected '==== v1 ====\n[\'value\']\n[\'value\']\n[\'\']\n==== v2 ====\n["\'\'"]\n[\'\']\n[\'\']\n==== a1 ====\n[\'\']\n[\'\']\n[\'a\']\n==== a2[0] ====\n[\'element\']\n[\'element\']\n[\'a\']\n==== a3[@] ====\n[\'1\', \'2\', \'3\']\n[\'1\', \'2\', \'3\']\n[\'a\', \'a\', \'a\']\n'
Got      "==== v1 ====\n['${!ref[@]@Q}']\n['${!ref[@]@P}']\n['${!ref[@]@a}']\n==== v2 ====\n['${!ref[@]@Q}']\n['${!ref[@]@P}']\n['${!ref[@]@a}']\n==== a1 ====\n['${!ref[@]@Q}']\n['${!ref[@]@P}']\n['${!ref[@]@a}']\n==== a2[0] ====\n['${!ref[@]@Q}']\n['${!ref[@]@P}']\n['${!ref[@]@a}']\n==== a3[@] ====\n['${!ref[@]@Q}']\n['${!ref[@]@P}']\n['${!ref[@]@a}']\n"




stdout: 


==== v1 ====
['${!ref[@]@Q}']
['${!ref[@]@P}']
['${!ref[@]@a}']
==== v2 ====
['${!ref[@]@Q}']
['${!ref[@]@P}']
['${!ref[@]@a}']
==== a1 ====
['${!ref[@]@Q}']
['${!ref[@]@P}']
['${!ref[@]@a}']
==== a2[0] ====
['${!ref[@]@Q}']
['${!ref[@]@P}']
['${!ref[@]@a}']
==== a3[@] ====
['${!ref[@]@Q}']
['${!ref[@]@P}']
['${!ref[@]@a}']

stderr: